Product Description

Original VP490 programmer

The VP-490 Programmer is an advanced, high precision and multipurpose unit. It shall satisfy a wide range of needs of our fast growing market.

The VP-490 surpasses other programmers on our market In terms of functionality and class as well as it offers an astonishing price/capability ratio.

The Programmer can be successfully used for:

• chip-tuning,
• RTV service and maintenance shops,
• computer service shops for BIOS updating,
• computer mainboard repairs (damages caused by faulty BIOS update operation), and in other circumstances where programming of memory or microprocessor is required.

APPLICATION:

• air-bag repairs
• chip-tuning
• washing machines and freezers repairs
• mobile phones repairs
• radio and TV-sets repairs
• damaged motherboard's BIOS repairs
• printers repairs

FEATURES:

• 48 pin ZIF socket with universal pin drives,
• Dimensions:166×108×26 mm,
• Weight: 300 g,
• Over 19000 devices supported,
• Interface with Laptop/PC computer through USB port,
• Accepts standard file formats: JEDEC, INTEL (Extended) HEX, Motorola S record, BIN,
• Manages 16 and 32 bit word split (Set Programming),
• Supports most compilers in JEDEC format, including ABEL, CUPL, PALASM, TANGO PLD, OrCAD PLD, PLD Designer and ISDATA,

• Easy and quick software updates ,
• Possible substitution for squire-wave oscillator 1kHz to 125kHz,
• Built-in frequency meter up to 100kHz
• 8-channel logic analyzer
• Optimum programming for each individual device,
• Automatically identifies the manufacturer and type of E(E)PROMs, Auto identifies TTL/CMOS logic IC
• Device insertion and poor pin-contact check,
• Supports 1.5V Low voltage devices,
• No need for external adapters for most devices,
• Auto-run mode starts programming automatically upon detection of chip insertion,
• Supports IC Card programming
• Fastest programming on the market. Programming of 89C58 in less than 4 seconds,
• Supports MS Windows XP/2000/NT/9x/ME.

DEVICE SUPPORT:

• EPROM: N/CMOS E(E)PROM, SeriesE(E)PROM, and FLASH Memory
• PLD: CPLD, EPLD, GAL,PEEL,PALCE (and more)
• Microcontrollers: Atmel, Intel, Microchip, Signetics, Zilog, etc.

STANDARD EQUIPMENT:

• V-490 Programmer
• cabling,
• manual,
• Software CD.